Selling a brand new set of Hedman hedders HTC Coated Full Length Headers for 1963-82 Chevy Corvette. 68300These are both in beautiful new shape. Still In the plastic. Never boiled to anything. Will fit other sbc builds Asking $300 for a $500 set of headers Call text
A mint set of stainless steel longtubes for any ls swapped 3rd gen f body. Any 82-92 camaro firebird or trans am. Bought these from hawks motorsports years ago and only put about 2k miles on them. They are made by stainless steel works specifically for hawks. My new setup is going to need 2 inch primaries so these need to go. Mint shape, no nicks or bends anywhere. 1 34 primary amd 3 inch colle...
New Pacesetter 70-2255 Ceramic Heat Coated Headers to 2400 degrees with 1 34 primary tubes and 3 slip fit collectors, which is what the price is based on, if you want the 2 12 Y-pipe from headers to Intermediate pipe you can have them. 1998 1999 2000 2001 2002 LS Camaro SS Z28 Firebird Trans Am Formula.I can ship if needed.
I have a Brand new set of shorty headers for a ford f250 Super duty 5.4 L gas motor.1.5 in. Tubing wEGR Fitting and aluminum block off plate for EGR.Direct Fit bolt-on Replacement, No Welding Required, Uses OEM Style ConnectionsHeavy Duty Laser Cut Port Flanges-No Warping or Leaking Premium Gaskets and HardwareWill Not Affect the Factory Warranty. Meets EPA and Carb RequirementsEvery Gibson Hea...
For sale is a brand new in the package Vibrant Performance Stainless Steel Header Flanges 3" ID. These retail at $22.00 each. Price included shipping via USPS within the USA. As seen in the photo s is the item you will receive Call or Text John With any Questions you may have: 630-688-6888 BUY FROM US WITH CONFIDENCE. DONT DEAL OR GET TAKEN BY ONLINE SCAMMERS!! WE STAND BEHIND ALL OF OUR PRE-OW...
Condition: New Manufacturer Part Number: 8900 Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709890009 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the head...
Condition: New Manufacturer Part Number: 8911A Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709891112 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the hea...
Condition: New Manufacturer Part Number: 8916A Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709891617 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the hea...
Condition: New Manufacturer Part Number: 8916S Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709891631 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the hea...
Condition: New Manufacturer Part Number: 8906 Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the head of the bolt, the ...
Condition: New Manufacturer Part Number: 8912 Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the head of the bolt, the ...
Condition: Used Warranty: No This is a Mid Mount Equal Length header used to mount the turbo directly behind the steering post. It is made out of Premium 321 Stainless and is in excellent condition. It uses a T3 flange to mount turbo, Like a Garrett GT3076. It also has a Flange for a Tial MVR, a 44mm Waste gate, not included. It also has a EGT probe fitting that can be capped if you don't need ...
VERY GOOD SET OF HEADERS FITS 1968-1972 CHEVELLE AND 1965-1970 IMPALA OR CAPRICE 3" COLLECTORS THEY HAVE BEEN SITTING FOR A WHILE JUST A LITTLE DUSTY BUT I THINK THEY ARE NEW--------100.00------773-31811076
Similar
Hello. I bought an 89 FC swap car and I am going to use the engine and trans for another project. That leaves all of the RX7 related parts available for sale. This was an in-progress build, and has never been fired. So all these parts are newnever used. Parts available includeTurbo 2 rear end and axles, bushed 400 firmAlum Driveshaft offerComplete Hinson Swap Kit mounts offerJTR Swap Headers, c...
Condition: New other (see details) Brand: STANDARD PRODUCTS Warranty: Unspecified Length Manufacturer Part Number: HR127 Country/Region of Manufacture: United States Placement on Vehicle: Front 1964 77 HORN RELAY MUSTANG FORD - NEW - STANDARD NUMBER HR127 - WE SHIP WORLD WIDE - Click to Enlarge Click to Enlarge UP FOR AUCTION IS THIS NEW HORN RELAY THAT FITS THE FOLLOWING: 1964 ALL FORD, 1965 M...
Condition: New Brand: WALKER PRODUCTS Manufacturer Part Number: 200-1018 UPC: Does Not Apply 1985 89 FORD THROTTLE POSITION SENSOR 4&6 CYLINDER ENGINES - WALKER 200-1018 Click to Enlarge Click to Enlarge UP FOR SALE IS THIS 1985 89 FORD THROTTLE POSITION SENSOR FOR 4 & 6 CYLINDER ENGINES. IT IS PRODUCED BY THE LEADER IN PRODUCTS FOR THE AUTOMOTIVE MARKET WALKER PRODUCTS AND COMES WITH INSTRUCTI...
Condition: New other (see details) Brand: GM Country/Region of Manufacture: United States Manufacturer Part Number: 6287160 UPC: Does Not Apply NOS 6287160 GM GROUND STRAP CAMARO CORVETTE FIREBIRD NOVA GTO Z28 SS NEW IN PKG Click to Enlarge UP FOR SALE IS THIS 1970'S NOS / NEW GM GROUND STRAP NUMBER 6287160 FOR A GM PRODUCTS ...USUALLY USED TO GROUND THE ANTENNA. SHIPPING $5.95 6287160 Before t...
Condition: New Brand: WALKER Country/Region of Manufacture: United States Manufacturer Part Number: 19029 ROCHESTER CARB#: 7028085, 17059053, 17086064, 17087311, 7044186, Warranty: Unspecified Length ROCHESTER #: 17059056 UPC: DOES NOT APPLY MARINE - OMC STERN DRIVE - ROCHESTER 2 BARREL CARBURETOR KIT 4 CYLINDER ENGINES - THIS KIT IS ENGINEERED FOR TODAY'S FUELS - IT IS ETHANOL TOLERANT - WE SH...
Condition: New Brand: WALKER Warranty: Yes Manufacturer Part Number: 70-105 Country/Region of Manufacture: United States UPC: DOES NOT APPLY HOLLEY POWER VALVE 10.5 SINGLE STAGE W/GASKET NEW Click to Enlarge UP FOR SALE IS THIS HOLLEY PART NUMBER 125-105, 10.5 SINGLE STAGE HOLLEY [OR DEMON] POWER VALVE & GASKET. IT OPENS AT 10.5 INCHES OF VACUUM. SHPG $$FREE$$ ON THE CONTINENTAL US 70-105 Befor...
Condition: New Warranty: Yes Manufacturer Part Number: 19002A Brand: WALKER PRODUCTS HOLLEY MARINE CARBURETOR KIT LIST NUMBERS 4473, 6151, 6152, 6407 & 80551 FORD MERCURY & OTHER - WE SHIP WORLD WIDE - THIS KIT IS ENGINEERED FOR TODAY'S FUELS - IT IS ETHANOL TOLERANT - Click to Enlarge UP FOR SALE IS THIS NEW HOLLEY REBUILD KIT TO SERVICE THE FOLLOWING MARINE APPLICATION CARBURETORS NUMBER 4473...
Condition: New Brand: WALKER PRODUCTS Warranty: Yes Manufacturer Part Number: 151096 HOLLEY 4011 CARBURETOR KIT 84014 84015 84016 84017 84021 NEW Click to Enlarge UP FOR AUCTION IS THIS BRAND NEW HOLLEY MODEL 4011 CARBURETOR KIT USED ON HOLLEY LIST NUMBERED CARBURETORS: 84014, 84015, 84016, 84017 & 84021.. INCLUDES BASE AND LID GASKETS, 30 & 50CC ACCELERATOR PUMP, SECONDARY DIAHRAMS, NEEDLES & ...
COMPRESSION TESTED Brand: Honda Warranty: 30 Days Warranty Manufacturer Part Number: H22A Euro-R, LSD Manuel Trans Country/Region of Manufacture: Japan Other Part Number: 45K Miles Core Charge: None Placement on Vehicle: Front Interchange Part Number: H22A FOR MORE INFO CALL JDM CHICAGO INC LOCAL PICK UP AVAILABLE 11127 FRANKLIN AVE FRANKLIN PARK, IL 60131 PHONE:847-288-0536 FAX:847-288-0538 TO...
Condition: Used Brand: GM Manufacturer Part Number: MISC UPC: Does Not Apply 5 1955 58 WASHER JAR LIDS W/5 INSERTS BUICK CHEVY CADILLAC OLDS PONTIAC USED Click to Enlarge Click to Enlarge UP FOR SALE IS THIS GROUP OF 5 WASHER JAR LIDS WITH CAPS AND THE RELATED LID INSERTS FOR THE 1955-58 GM, FORD & OTHER TRICO WINDSHIELD WASHER SYSTEMS... SHPG $7.95 IN THE CONTINENTAL US Before the Auction Ends...
1 + ... Next >