622 Indy BB Mopar New/fresh complete, unassembled. New Indy Maxx block 4.84 bore spacing raised cam block, all machine work finished ready for assembly Callies 4.75 stroke crank New GRP rods New Ross pistons New rings & bearings Fresh from Bullet 55mm cam w/new roller bearings Fresh 622-13 heads with new springs and valve job, Jessel rockers New Comp lifters with Trend tapered push rods Hogan s...
Asking $15,000 OBO 30 passes 3000lbs. Backhalf ran 9:03 horsepower Sprayed it only twice and with a hundred shot. She ran 8:76 I have a Nitrous converter and horsepower converter also if you like. 528 C.I. B-1 Head, Indy Aluminum Low Deck Titanium Intake Valves & S.S. Exhaust Valves Aluminum GRP Rods Cam Motion 816 lift Dur. 283In/Ex297 Lobe Cen. 108/116 Engine Stroke 4.150 1050 Carb 4500 NOS f...
Condition: New Manufacturer Part Number: 8916A Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709891617 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the hea...
Condition: New Manufacturer Part Number: 8916S Country/Region of Manufacture: United States Surface Finish: NICKEL PLATED Part Brand: STAGE 8 UPC: 765709891631 Shamrock Performance Auto Inc. Locked for Good!! Stage-8 Locking header bolts are made of grade-8 quality steel and use a patented 3 piece system that consists of a grooved bolt, a retainer and spring clip. The retainer fits over the hea...
Condition: Used Warranty: No This is a pair of early Mopar Wedge 383 413 426 and 440 used from 1965 thru 1979 Quench type, or some call closed chamber, cylinder heads. They have been Cleaned and Magnafluxed, no cracks were found. If you look closely you can see the valve seats have never been cut and heads have not been milled, they are in good condition. They can be used with flat top pistons ...
Similar
1 Pair of Weld Wheels 15x7 dual pattern 4 12x5 4 34x5 $125,4 1978 Monte Carlo Factory wheels $150,4 15x7 unilug ET Rims look like Keystone some pitting $150,3 Mopar Turbine Wheels $150,Mopar Tunnel Ram Intake not sure what C.I. engine it fits.1 Complete Chevrolet Cross Fire intake system $350.1 pair of 1982 Camaro Tail Light Assemblies $100.1 Pair of 1974 Firebird Tail Light Assemblies $150.1 P...
1 Pair of Weld Wheels 15x7 dual pattern 4 12x5 4 34x5 $125,4 1978 Monte Carlo Factory wheels $150,4 15x7 unilug ET Rims look like Keystone some pitting $150,3 Mopar Turbine Wheels $150,Mopar Tunnel Ram Intake not sure what C.I. engine it fits.1 Complete Chevrolet Cross Fire intake system $350.1 pair of 1982 Camaro Tail Light Assemblies $100.1 Pair of 1974 Firebird Tail Light Assemblies $150.1 P...
Instrument cluster from a 1966 Dodge Coronet 500 SE, but should work on 1967 and other mopar trim levels. This is from a car with AC. Came out of a running, driving car that I bought as a parts car.Bezel is in nice shape with no cracks, radio hole has not been modified. Some spots where the chrome is worn. Odometer shows 19,929. Has all of the warning lights, clock, temperature, alternator, spe...
Condition: Used Brand: FORD GM MOPAR AMC CHRYSLER PLYMOUTH MUSTANG CAMARO Warranty: No Manufacturer Part Number: CUDA CHALLENGER HOT ROD RAT GASSER SCRAP 302 427 Here is a vintage Stewart Warner tach and vacuum gauge combo. Model # is 760 C. This is a 6 volt tach. I did find a 1958 Stewart Warner tach booklet on the internet and this is where this info came from. Tach face is 4 1/2 inches in di...
Condition: Used Brand: FORD GM MOPAR AMC CHRYSLER PLYMOUTH MUSTANG CAMARO Warranty: No Manufacturer Part Number: CUDA CHALLENGER HOT ROD RAT GASSER SCRAP 302 427 Here is a vintage Stewart Warner tachometer sending unit for the 760 model tachs. Model # is 762 S. This unit fits the Mallory distributors 4, 6, and 8 cylinder units. This will work on any vehicle that uses a Mallory distributor of th...
Condition: Used Brand: FORD GM MOPAR AMC CHRYSLER PLYMOUTH MUSTANG CAMARO Warranty: No Manufacturer Part Number: CUDA CHALLENGER HOT ROD RAT GASSER SCRAP 302 427 Other Part Number: CHEVY Here is a vintage new nos RAC tachometer. This is a 6 or 8 cylinder tach. This has never been used and is still in the original packaging. Instructions mounting hardware are also included. Face looks just like ...
Condition: Used Brand: Mopar Rim Diameter: 15 Rim Material: Steel Number of Bolts: 5 Rim Width: 7 Manufacturer Part Number: 3580071 This is a pair of Mopar Rally Wheels that are in excellent condition. 1rim Dated 12-06-72 the other 3-12-73 Questions call Greg 708-301-7595
Condition: Used Brand: Mopar Rim Diameter: 15 Rim Material: Steel Number of Bolts: 5 Rim Width: 7 This is a Set of 4 Original Mopar Rally Wheels no reproduction anything. We have 4 wheels,4 Trim Rings and 4 Centers, all Vintage Mopar. For those who are into dates We have 2 pairs of matched dates. 2 Wheels are dated 2-19-70 and 2 are dated 9-26-69. They came on the same car when I received them....
Returns Accepted: ReturnsNotAccepted Brand: Mopar Manufacturer Part Number: 05037935AA Placement on Vehicle: Front Warranty: No DODGE VIPER AIR CLEANER / INTAKE ASSEMBLY 2008-10 GEN 4 DODGE PART # 05037935AA COMPLETE WITH FILTER 05038070AA AND AIR DUCTS 0503805AA DOES NOT INCLUDE MASS AIR FLOW SENSORS AS NEW, NO DAMAGE ANY QUESTIONS CALL 847-508-1598 GREG
1 + ... Next >